World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

IMV Austin 1300

All IMV Photos

IMV Austin 1300 - information: IMV Austin 1300 is a very good car, that was released by "IMV" company. We collected the best 7 photos of IMV Austin 1300 on this page.

Brand Name IMV
Model IMV Austin 1300
Number of views 59495 views
Model's Rate 6.8 out of 10
Number of images 7 images
Interesting News
  • DUCATI MULTISTRADAS.

    When I had a chance to try out the Ducati Multistrada Pikes Peak last year I was incredibly impressed, the concept of four bikes in one is bandied about quite commonly when referring to the Multistrada and is a good reflection of the bike’s abilties. The current Multistrada is a large bike with a wet weight of 235kg - relatively light all things considered. I found the seat height tall, although it is adjustable between 825 and 845mm and couldn’t get both feet flat to the ground, but balance and low speed maneuvering were both very good. Heated grips of a chilly morning are priceless and the centre-stand is a nice touch, although probably not for everyone. They are part of the Touring pack which includes heated grips, panniers and center-stand. The Multistrada S benefits from the Ducati Skyhook Suspension and also includes a few nifty additional features like full LED headlamps, including the Ducati Cornering Lights (DCL). The braking systems on the S is also an upgraded Superbike spec system, with M50 Brembo front calipers on 330mm rotors, with a dual piston Brembo rear caliper on 265mm rotor. Also standard is the Ducati Multimedia System, which uses Bluetooth to accept incoming calls, alert you to messages and control your music, when synced with your other devices, displayed via the S’s full colour TFT display. On the bike, performance from the DVT Testastretta starts low and tractor-like, with strong but controllable low end-torque, and between 4000 and 5000rpm transforms into sportsbike like drive - in fact if you want to move off in a hurry try opening that throttle wide open, it’s exhilarating. Just keep the revs up past 4000rpm where it transitions into much smoother running, with slight vibes felt through the ‘bars, but not in an annoying fashion - you’ll have all the torque you could wish for, for rapid overtaking or acceleration. You can also modify each of the riding modes for a variety of settings, where I was using the baseline settings, which means you can have each mode set up for specific conditions, whether that’s suspension, power delivery, ABS, DTC or DWC. The Skyhook Suspension was a standout and in Sport mode with one helmet (the one rider, no luggage setting) I could feel the forks providing more support during heavy braking, only to soften as I came to a stop. Through the local twisties the Skyhook suspension proved itself, with an ability to easily absorb road irregularities. Coming into corners needs more effort than your regular sportsbike, with the Multistrada obviously carrying its weight taller and taking more input to follow your chosen path. It wasn’t the sharpest on tip in, with the standard settings - but that’s something you can tweak thanks to the level of adjustability on offer. The taller bike also means you’re leaning over further, which was easy and confidence inspiring but lends itself to coming into your corners nice and wide.You can feel that you’re relying on a system of suspension that essentially has a mind of its own but as you get used to that fact and show more confidence in the bike it only gets better and better. Part of what sets the newest Skyhook Suspension (DSS) system apart is the Evo suffix, with the previous sensors now joined by the Inertial Measurement Unit (IMU) which is used to provide cornering ABS to the Brembo braking system with Bosch 9ME ABS unit. This means the DSS Evo system is able to take into account your lean angle when calculating the ideal suspension response. It’s high tech and the results on the road speak for themselves. I was hoping to take my wife for a ride as a pillion to get an opinion on riding two-up, but with all my testing mid-week unfortunately couldn’t make it happen. Now it’s quite possibly you’re thinking to yourself, why spend the extra $4000 on the S model, which is a fair question. The S is the obvious choice though, as the Multistrada truly is many bikes in one, with the S offering the ultimate in suspension adjustability at the click of a few buttons. It’s the future of motorcycling and Ducati’s leading the charge.
  • NORTON FLAT TRACK.

    This modern Norton dirt track custom is the work of Jamie Ireson’s 72Motorcycles, in collaboration with Norton Motorcycles - a tribute to the 1970s RonWood racing machine that won three Ascot track championship titles and was taken to a National dirt track victory by Alex Jorgenson. Based on a newCommando 961, it was recently launched at Motorcycle Live on the official NortonMotorcycles stand as the first of a limited edition run of 12. Ireson said: “The project started whenmy partnerMerryMichau photographed the 2014 Norton brochure. She toldNorton CEO Stuart Garner that I build custombikes and it went from there. Stuart asked us to come up with some ideas and it turned out that we had the same thoughts on building a custombike based on RonWood’s dirt tracker. Ireson is a design engineer by trade and used his experience gained in the automotive industry to model the bike in CAD before committing to metal. “The one thing we needed to do was lower the bike, and working in CAD with models that Norton supplied allowedme to see what effect that had.” That was November 2014 but it took until June 2015 for the project to take off. “Norton sent me a rolling chassis and engine unit with the only stipulation being that the bike had to be ready forMotorcycle Live at the NEC,” says Jamie. The engine and transmission are standard 961, as is the main frame, but Jamie modified the rear end. He says: “The RonWood bike has a really small oil tank, because it’s designed to only do a small number of laps. I cut off the end off the original tank, made up some bends on a CNCmachine and got themwelded up to follow the lines of Ron Wood’s [oil-carrying] frame.” According to Jamie, the standard Norton chassis geometry is slap bang in the middle of what is considered an ideal flat track set-up, but this build had to retain the standard 17in wheels. The swingarm is also standard, but with added bracing. The standard Ohlins forks were too long so Jamie opted for shorter, larger-diameter 58mm Ducati Panigale forks which slot into new yokes made from Jamie’s CAD drawings by Fastec Racing in Suffolk, who also did machining work on footpeg mounts and the velocity stacks. Jamie produced a buck for the tank, from which Parker Fabrication in Bournemouth produced the alloy tank. “The inspiration of the Ron Wood bike was the gorgeous red paintwork and tank graphics. We talked with out painters, Image Design, about giving it a modern twist, but they said it was so good we should leave it. The only change is using the current Norton logo.” The engine is standard, but Jamie’s removed the original airbox, so: “we might pick up anything between five and 10bhp.” The exhaust follows the same lines as the Ron Wood bike. It’s all custom made and hand-rolled by Tom at Foundry Motorcycles. The pipes have been given a super hard-wearing ceramic-coated black by Wes at Hi-Spec Coatings in West Sussex. Lasertech Engineering did all the frame welding. The Norton 961 MM Flat Track is priced at ?30,000. “All 12 will be identical except for the number,” says Jamie. “We’ve got 44. We’re keeping this original bike. Customers can have any number, but we won’t use one number twice.”
  • RC 390.

    If you thought the RC 390 was a great bike to own and ride, well, guess what, it becomes even better now. KTM have ditched that underbelly exhaust for a more conventionally mounted end can on the right and have added ride-by-wire technology to help refine the delivery of the 44 PS from the bike’s liquid-cooled 373-cc single-cylinder engine. A slipper clutch has also been thrown in to reduce wheel chatter during trail braking or aggressive downshifting. All of these additions also mean that for the first time the KTM RC 390 is now Euro 4 compliant. Expect these changes to come into the 390 Duke as well.
Top IMV models
Popular Searches
World Encyclopedia of Cars
Copyright 2017. All rights under protection.