World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

MG B [3/3699]

All MG Photos

MG B [3/3699] - information: MG B [3/3699] is a very good car, that was released by "MG" company. We collected the best 8 photos of MG B [3/3699] on this page.

Brand Name MG
Model MG B [3/3699]
Number of views 55419 views
Model's Rate 7.4 out of 10
Number of images 8 images
Interesting News
  • RECREATING HISTORY.

    A stunningMoto Guzzi V8 works racer replica looks certain to steal the show at Coys sale at theMCNLondonMotorcycle Show at Excel on February 13. The bike was built in the early 2000s by ex-factory technicians with access to original drawings and spares to use as patterns to make new components. Coys haven’t provided an estimate but, with only two original V8 racers existing, the parade-ready replica should attract a three-figure sum. Other bikes from the same Italian collection to be offered at Excel include a gorgeous 1957 Ducati 125cc Bialbero racer (estimate ?65,000-70,000), a rare 1955 100cc Cecatto Bialbero racer (?29,000-35,000), a 1938 250cc Benelli Bialbero race bike (?48,000-52,000) and a 1931 1300cc Indian Type 402 four, fully restored in 2010 with minimal mileage since (?55,000-65,000). Entries for the capital’s only motorcycle-only sale scheduled for 2016 are still open and the catalogue - which will be available on January 25 - closes on January 19. Entry fees are ?350 per bike and buyers’ and sellers’ commission is set at 10% plus VAT. Over 100 lots are promised for the sale, which starts at 2.30pm on Saturday February 13 (viewing from February 12). Potential vendors contact Anthony Godin (07854 213928 or 0208 614 7888).
  • Bimota invent the techtro….

    Hands up-wedidn’t expect this. But givenBimotahavebased their newretro on theirmost contemporary, exclusive model we don’t think anyone did. TheirwildTesi 3D (Bike, Aug 2015 issue) is an engineeringmasterclass.Hub centre steering and a front swingarm separate suspension, steering and braking forces - so suspension functionswhile braking, bumps don’t affect steering, and so on. It’s amodernvisionof hewnaluminiumand hand-finishedparts. And soBimota think thismakes it perfect for some retroaction. For theRaceCafe the 3D’s angular body is swapped for a traditional profile and tiny seat unitwith the essential brown perch, and there’s the same headlight as onAriel’sAce. The 1078ccDucati V twin is swapped for the803cc Scrambler unit, with a curvy new pipe. Swingarms are un retro carbon. Stare long enough and, fromsome angles, the RaceCafe almost works… but not quite. For us, a Tesi should be all about sharp, cutting edge design. Other Bimotanews ismorepleasing. The newImpeto uses the Diavel’s bulging 1198ccTestastretta engine, anoptional blower taking peak power past 200bhp. Youcan specify a carbon frame, too. Best of all, Bimota are going back to their roots andoffering frame kits. Their BB3 canbe supplied as a rolling chassis to take the motor from a salvaged BMW S1000RR. Just like the good old days. Let’s hope the kit option extends to more models - we’d love to build our own Tesi (no brown seat).
  • Audi’s electrified future.

    The introduction of mild hybrids to Audi’s model range is set to edge efficiency ever closer to the kind of economy figures enjoyed by TDI owners. But it doesn’t mean the death of the diesel engine, as the introduction of cutting edge technology can be paired to both TDI diesel and TFSI petrol engines. Audi says that within ten years, its entire model range will feature the technology. The key elements of the new system are an 11 Ah capacity lithium-ion battery pack and belt starter generator, with the latter replacing the current starter motor. Coasting becomes possible from around 9mph upwards, so that if the driver takes their foot off the accelerator, the car will coast along for a short time with the engine off, saving fuel. It’s possible to recuperate up to 5kW (7bhp), with the generator returning that power, reducing fuel usage and boosting economy as a result. And while this system can be integrated into current 12-volt systems, Audi is on the verge of announcing that it will put a new 48-volt system into production, with a capacity of harnessing 12kW (16bhp), that will allow coasting for up to 30 seconds, delivering even better efficiency compared to the 12-volt system. The company first gave a glimpse at the technology in the Prologue Concept car last year at the Los Angeles motor show. Other benefits of the introduction of a 48-volt electrical system includes the ability to have much smaller cable cross sections, reducing the weight of the wiring harness, and because it has four times the power, there’s opportunities to add additional innovative technology for the suspension and drivetrain. Further into the future, Audi’s engineers plan to convert the auxiliary systems, like pumps, superchargers for the engine, transmission and air conditioning system to 48 volts. Today these are driven hydraulically or by the engine, but in the future they will be powered by electricity and lighter and more compact. Audi will soon announce an electromechanical active roll stabilisation system, which features an electric motor and a three-stage planetary gearbox that separates the two halves of the stabiliser from each other. For relaxed and comfortable driving, the two halves are decoupled, resulting in cossetting ride comfort. For the sportier driver, the tubes are interconnected and twist against each other, delivering a tauter, more dynamic ride, and less roll when cornering. The front and rear stabilisers can also be adjusted independently allowing even greater degrees of fine tuning. The system is also capable of harnessing energy, and the motor can act as a generator, converting it to electrical energy. But Audi’s engineers are already looking at a second, more advanced project using the 48-volt setup, though it is still in the very early prototype stage. Being developed under the working title of eROT, an electromechanical rotary damper replaces today’s hydraulic item. The system isn’t too far apart from the active roll stabilisation arrangement in terms of basic principles, but a strong lever arm absorbs all of the forces that occur on a bumpy road, and via a series of gears, the force is transmitted into an electric motor, which then converts it to electricity. Recuperation is, on average, around 150 watts on an average road, with a freshly resurfaced road generating as little as 3 watts, while a badly maintained country lane may generate as much as 613 watts. Over a cross section of different roads, CO2 emissions savings could be as much as 3g/ km or four to five mpg.
Top MG models
Popular Searches
World Encyclopedia of Cars
Copyright 2017. All rights under protection.