World Encyclopedia of Cars
The best old cars, news and reviews about old cars. Stay in touch!

Wolseley 14/60

All Wolseley Photos

Wolseley 14/60 - information: Wolseley 14/60 is a very good car, that was released by "Wolseley" company. We collected the best 7 photos of Wolseley 14/60 on this page.

Brand Name Wolseley
Model Wolseley 14/60
Number of views 68422 views
Model's Rate 5.5 out of 10
Number of images 7 images
Interesting News
  • Honda CB Hornet 160R.

    HMSI recently launched their brand-new motorcycle, the CB Hornet 160R, at an attractive price of Rs 79,990 (ex-showroom). The CB Hornet 160R is essentially the CB Unicorn 160 with a brand-new styling and a name that was first seen in Honda’s big bike range. The Hornet is powered by the same 162.7-cc single-cylinder motor that serves the Unicorn, but it has been tuned to deliver higher power and torque. It produces 15.88 PS and 14.76 Nm of torque which makes it the most powerful bike in its segment. Following the segment trend, the Hornet features a wide 140 section rear tyre and trendy styling. Read more about Honda’s new weapon in this competitive segment on page number 64.
  • 2017 SUZUKI GSX-R1000 CONCEPT.

    Racers and sportbike riders have been waiting impatiently for several years now for an updated Suzuki literbike, but the end is in sight: At the EICMA show last November, the company finally unveiled a new GSX-R1000. But while the new bike was labeled as a 2017 model, it was also called a “concept,” indicating there may still be work to be completed before it reaches production. Suzuki says that the goal for the new bike was to create the “most powerful, hardest-accelerating, cleanest-running GSX-R ever built,” and the “lightest, most aerodynamic, and best-handling GSX-R1000 ever.” To that end, the bike benefits from lessons learned from the GSX-RR MotoGP project. Specifically, the GSX-R uses what Suzuki refers to as a “Broad Power System,” intended to maximize top-end power without sacrificing low-end and midrange torque via four new features: variable valve timing, valves operated by finger followers, top-feed fuel injectors, and dual SET valves in the exhaust headers. Suzuki’s Variable Valve Timing System utilizes a ball-and-groove arrangement on the intake camshaft, activated by centrifugal force stacking the balls in different grooves. As rpm increases, the intake cam is retarded, optimizing cam timing over the rpm range. The new valve train also uses a finger follower setup to improve valve control and reduce moving mass in the top end, allowing increased valve lift and higher peak rpm. The top-feed fuel injectors are located in the airbox (they were previously mounted in the throttle bodies) to better atomize the fuel for more top-end power, again without sacrificing low-rpm output. And the final part of the Broad Power System is Suzuki Exhaust Tuning-Alpha, which utilizes a butterfl y valve between the number one and four exhaust headers and another between the number two and three headers. The valves remain closed at lower rpm to enhance torque and open at higher rpm for more power. Another goal for the engine was to “optimize dimensions to enhance cornering performance” as well as make the chassis as compact as possible. The frame is all new and has revised geometry, though again no numbers were given. Suspension consists of a Showa Balance Free Fork and Balance Free Rear Cushion shock very similar to those used on the 2016 Kawasaki ZX-10R; the fork has external nitrogen-charged oil reservoirs and external damping circuits, and the shock is Showa’s latest iteration of the BFRC and is significantly lighter. Other chassis updates include high-volume intake ducts, a lower top and sleeker design for the fuel tank, and more aerodynamic bodywork. Even the fairing mounting bolts have been redesigned, with a new fl at-top shape to reduce air resistance, with other mounting hardware recessed to prevent turbulence. No mention was made of the new GSX-R’s brakes aside from the use of electronic ABS, but the calipers are very similar to the previous model’s Brembo four-pot monoblock units. The rotors, however, appear to be a variant of Brembo’s T-drive discs, with half the traditional buttons replaced by T-shaped pins. According to Brembo, the assembly system transfers braking force more effectively, is lighter, and has greater resistance to thermo-mechanical stress. A single-valve ride-by-wire throttle assembly replaces the old model’s dual-valve setup, and the electronics package now features a 10-level traction control system, three power modes, a quickshifter that works on upshifts as well as downshifts, and launch control. The press material contains no mention of an IMU as part of the electronics package; in this regard the GSX-R may be a step behind the YZF-R1 and new ZX-10R, but this is one aspect that could very well change before the bike reaches production. No word was given on price or availability for the new model, but with race teams the world over clamoring for the updated platform, it’s a safe bet the new bike will be a very-early-release 2017 model.
  • Bimota invent the techtro….

    Hands up-wedidn’t expect this. But givenBimotahavebased their newretro on theirmost contemporary, exclusive model we don’t think anyone did. TheirwildTesi 3D (Bike, Aug 2015 issue) is an engineeringmasterclass.Hub centre steering and a front swingarm separate suspension, steering and braking forces - so suspension functionswhile braking, bumps don’t affect steering, and so on. It’s amodernvisionof hewnaluminiumand hand-finishedparts. And soBimota think thismakes it perfect for some retroaction. For theRaceCafe the 3D’s angular body is swapped for a traditional profile and tiny seat unitwith the essential brown perch, and there’s the same headlight as onAriel’sAce. The 1078ccDucati V twin is swapped for the803cc Scrambler unit, with a curvy new pipe. Swingarms are un retro carbon. Stare long enough and, fromsome angles, the RaceCafe almost works… but not quite. For us, a Tesi should be all about sharp, cutting edge design. Other Bimotanews ismorepleasing. The newImpeto uses the Diavel’s bulging 1198ccTestastretta engine, anoptional blower taking peak power past 200bhp. Youcan specify a carbon frame, too. Best of all, Bimota are going back to their roots andoffering frame kits. Their BB3 canbe supplied as a rolling chassis to take the motor from a salvaged BMW S1000RR. Just like the good old days. Let’s hope the kit option extends to more models - we’d love to build our own Tesi (no brown seat).
Top Wolseley models
Popular Searches
World Encyclopedia of Cars
Copyright 2017. All rights under protection.